ECOVACS Goat O1000 LiDAR PRO Robotic Lawn Mower with TruEdge Trimmer for 1/4 Acre, Wire-Free LiDAR Navigation, Zero-Edge Cutting, Auto Mapping, AIVI 3D Obstacle Avoidance, 45% Slope

Price: $1,499.99 - $1,199.00
(as of Apr 23, 2026 19:39:18 UTC – Details)

Product description

1 1 Min Setup

2 Perfect Edges

3 Stable Navigation

4 How to Choose Your GOAT

1 Mower with Trimmer

2 No Trimming Needed

3 For All Edges

4 Adjustable Height

1 HoloScope 360

2 Unaffected by Shade

3 Efficient Path

1 Smart & Rugged

2 AIVI 3D Avoidance

3 For Tough Lawn

4 IPX6 Waterproof

5 Customizable Mowing

Why the GOAT cannot be connected to the network？

1. Ensure you’re using a 2.4GHz network with Bluetooth ON.

2. Move the robot closer to the router for a stronger signal.

3. Follow the guide: Press and hold the charging button until the countdown ends.

Tip: Restart the GOAT if the issue persists.

How do I install the trimmer module?

Use the 3 included screws (2 spare, 1 pre-installed). A PH2 Phillips screwdriver (>10 cm) is recommended. Open the side rubber cap to access holes and adjust the angle slightly if alignment is tight.

How do I start a trimming task?

Two ways to start trimming:

• Manual: Select Trim mode in the app, choose boundary, tap start.

• Schedule: Set a fixed time in Schedule for automatic start.

Note: Trimming is louder than mowing—schedule during daytime to avoid disturbing neighbors.

Why does the trimmer module scrape against edges or corners?

For smooth trimming:

• Clear boundary obstacles to keep vision unobstructed.

• Avoid edges with 5–7 cm (2–3 in) steps to prevent sticking.

• Map sharp corners slightly inward so GOAT can cut close to edges while reducing contact with walls or rocks.

What if the trimmer line is not tangled?

• Manual Release: Press the button on the trimmer cover to pull out a line segment.

• Mapping Tip: Map sharp corners slightly inward to reduce collisions with walls or rocks and prevent line snapping.

Wire-Free Robotic Lawn Mower with LiDAR Navigation – GOAT O1000 LiDAR PRO is a wire-free robotic lawn mower that requires no perimeter wire or RTK antenna. The HoloScope 360° Dual-LiDAR system automatically maps your yard and delivers precise 2 cm positioning — even under trees, near fences, or in shaded areas where GPS mowers lose signal.
Built-In Edge Trimming for Clean Borders – Unlike standard robot lawn mowers, this model features an integrated TruEdge trimmer for true edge-to-edge cutting. It trims along driveways, sidewalks, flower beds, and irregular lawn borders — reducing the need for manual string trimming after mowing.
Advanced 3D Obstacle Detection for Safer Mowing – Powered by AI Vision and 3D ToF LiDAR, GOAT O1000 LiDAR PRO accurately identifies and navigates around more than 200 types of obstacles — from kids’ toys and patio furniture to pets and small wildlife. With detection precision down to 5 cm, it maintains safe clearance while mowing closely around objects, helping protect your lawn, landscaping, and loved ones.
Smart App-Controlled Lawn Mower with Custom Zones – Control your smart lawn mower through the ECOVACS app. Create multiple mowing zones, set no-go areas, adjust cutting height and speed, define travel paths between zones, and customize mowing schedules. Designed for complex yard layouts and personalized lawn care.
Designed for Tight Spaces Others Can’t Reach – Built with a super-narrow body, GOAT O1000 LiDAR PRO easily passes through tight paths and narrow lawn corridors as slim as 0.8 m. Perfect for compact yards, side lawns, and complex layouts where larger robotic mowers struggle.