Smaraad 600W 12V Wind Turbine Generator, Wind Generator Kit with Charge Controller, Wind Power Generator for Marine, RV, Home, Windmill Generator Suit for Hybrid Solar Wind System

Price: $223.99
(as of Feb 12, 2026 15:23:52 UTC – Details)

Product description

Wind Turbine x 1

Blades x 8

Controller x 1

Nose Cone x 1

Set Screws and Nuts x 1

Installation Notes x 1

Anemometer x 1（no battery）

Note:Without tower tube

(We recommend：steel pipes or iron pipes, diameter :55±2mm)

Application 1. For Home Use 2. For Monitoring Use 3. For Boat / Marine Use 4. For Wind Solar Hybrid Streetlight Use And More

Rated power:600 W

Maximum power:650 W

Number of blades:8

Rated voltage:12/24 V

Start-up wind speed:2.0 m/s

Rated wind speed :13 m/s

Working speed:3-25 m/s

Survival wind speed:40 m/s

Wind wheel diameter: 29.5in/75cm

Blade Material: Nylon Fiber Generator Type: 3-Phase AC Permanent Magnet Generator Braking Method: Electromagnetic Wind Direction Adjustment: Automatically Adjust The Windward Angle Operating Temperature: -40 ~ 80 ℃ Magnetic Material: Neodymium Iron Boron Cabin Material: Die Casting Aluminum Alloy

Efficient Generator

Three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high performance NdFeB permanent magnet.

High Quality Material

The blade material is made of high-strength plastic with 30% carbon fiber and anti-UV anti-corrosion material, which is both beautiful and durable.

Easy to Install

Nesting the black leather cushion inside the reducing joint of the wind turbine then putting the tower inside reducing joint. Connecting the cover of reducing joint by screws and fastening. Tightening the screws by hex key.

1. The wind turbine should be installed where there is strong wind or no tall buildings and obstacles, If installing the wind turbines near the obstacles, the position is better as far as possible from obstructions, or the installation height should be 20Ft higher than the top of obstructions(As show), which can make full use of the wind power.

2. We can make use of the growth effect on the hills (As show). It’s a good place to set up

3. It’s should avoid the cliff, the turbulent region.

This wind turbine motor adopts a three-phase AC permanent magnet synchronous generator,Efficient and compact alternator with high performance rare earth NdFeB permanent magnets. with low starting wind speed(2.0m/s), low noise（40dp）, beautiful appearance, with attached tools you can set up this wind turbine conveniently.It is lightweight and easy to install quickly and easily.
The working temperature of the motor is -40°C~80°C, and the wires are heat-resistant and moisture-proof,suitable for all weather conditions and all seasons. long service life up to 20 years.
The wind turbine generator blade adopts a new process of precision injection molding,The fan blades are made of reinforced fiber nylon, which is more flexible and has a high safety factor，It is light in weight and can run very quickly（2.0m/s）.The blades are waterproof, corrosion-resistant, and rotate quickly.The unique magnetic circuit design makes the starting torque very small, which can effectively ensure the breeze starting ability of the fan.
The fan is controlled by MPPT intelligent microprocessor, which can effectively adjust the current and voltage,the current and voltage regulation is effective（12V/24V）, the utilization rate of wind energy is high, which contributes to the annual power generation.
The wind turbine adopts the built-in maximum power golden controller, which can effectively adjust the current and voltage, and the DC output. The controller can help the battery to be charged intelligently and automatically protected. It is waterproof and dustproof, which can be fit in all environments and all seasons.